By hoxo_m
1. Overview
Density ratio estimation is described as follows: for given two data samples $x$ and $y$ from unknown distributions $p(x)$ and $q(y)$ respectively, estimate $$ w(x) = frac{p(x)}{q(x)} $$ where $x$ and $y$ are $d$dimensional real numbers.
The estimated density ratio function $w(x)$ can be used in many applications such as the inlierbased outlier detection [1] and covariate shift adaptation [2]. Other useful applications about density ratio estimation were summarized by Sugiyama et al. (2012) [3].
The package densratio provides a function densratio()
that returns a result has the function to estimate density ratio compute_density_ratio()
.
For example,
set.seed(3)
x < rnorm(200, mean = 1, sd = 1/8)
y < rnorm(200, mean = 1, sd = 1/2)
library(densratio)
result < densratio(x, y)
result
##
## Call:
## densratio(x = x, y = y, method = "uLSIF")
##
## Kernel Information:
## Kernel type: Gaussian RBF
## Number of kernels: 100
## Bandwidth(sigma): 0.1
## Centers: num [1:100, 1] 1.007 0.752 0.917 0.824 0.7 ...
##
## Kernel Weights(alpha):
## num [1:100] 0.4044 0.0479 0.1736 0.125 0.0597 ...
##
## The Function to Estimate Density Ratio:
## compute_density_ratio()
In this case, the true density ratio $w(x)$ is known, so we can compare $w(x)$ with the estimated density ratio $hat{w}(x)$.
true_density_ratio < function(x) dnorm(x, 1, 1/8) / dnorm(x, 1, 1/2)
estimated_density_ratio < result$compute_density_ratio
plot(true_density_ratio, xlim=c(1, 3), lwd=2, col="red", xlab = "x", ylab = "Density Ratio")
plot(estimated_density_ratio, xlim=c(1, 3), lwd=2, col="green", add=TRUE)
legend("topright", legend=c(expression(w(x)), expression(hat(w)(x))), col=2:3, lty=1, lwd=2, pch=NA)
2. How to Install
You can install the densratio package from CRAN.
install.packages("densratio")
You can also install the package from GitHub.
install.packages("devtools") # if you have not installed "devtools" package
devtools::install_github("hoxom/densratio")
The source code for densratio package is available on GitHub at
3. Details
3.1. Basics
The package provides densratio()
that the result has the function to estimate density ratio.
For data samples x
and y
,
library(densratio)
result < densratio(x, y)
In this case, result$compute_density_ratio()
can compute estimated density ratio.
3.2. Methods
densratio()
has method
parameter that you can pass "uLSIF"
or "KLIEP"
.

uLSIF (unconstrained LeastSquares Importance Fitting) is the default method. This algorithm estimates density ratio by minimizing the squared loss. You can find more information in Hido et al. (2011) [1].

KLIEP (KullbackLeibler Importance Estimation Procedure) is the anothor method. This algorithm estimates density ratio by minimizing KullbackLeibler divergence. You can find more information in Sugiyama et al. (2007) [2].
The both methods assume that the denity ratio is represented by linear model: $$ w(x) = alpha_1 K(x, c_1) + alpha_2 K(x, c_2) + … + alpha_b K(x, c_b) $$ where $$ K(x, c) = expleft(frac{x – c^2}{2 sigma ^ 2}right) $$ is the Gaussian RBF.
densratio()
performs the two main jobs:
 First, deciding kernel parameter $sigma$ by cross validation,
 Second, optimizing kernel weights $alpha$.
As the result, you can obtain compute_density_ratio()
.
3.3. Result and Paremeter Settings
densratio()
outputs the result like as follows:
##
## Call:
## densratio(x = x, y = y, method = "uLSIF")
##
## Kernel Information:
## Kernel type: Gaussian RBF
## Number of kernels: 100
## Bandwidth(sigma): 0.1
## Centers: num [1:100, 1] 1.007 0.752 0.917 0.824 0.7 ...
##
## Kernel Weights(alpha):
## num [1:100] 0.4044 0.0479 0.1736 0.125 0.0597 ...
##
## Regularization Parameter(lambda):
##
## The Function to Estimate Density Ratio:
## compute_density_ratio()
 Kernel type is fixed by Gaussian RBF.
 The number of kernels is the number of kernels in the linear model. You can change by setting
kernel_num
parameter. In default,kernel_num = 100
.  Bandwidth(sigma) is the Gaussian kernel bandwidth. In default,
sigma = "auto"
, the algorithms automatically select the optimal value by cross validation. If you setsigma
a number, that will be used. If you set a numeric vector, the algorithms select the optimal value in them by cross validation.  Centers are centers of Gaussian kernels in the linear model. These are selected at random from the data sample
x
underlying a numerator distributionp_nu(x)
. You can find the whole values inresult$kernel_info$centers
.  Kernel weights are alpha parameters in the linear model. It is optimaized by the algorithms. You can find the whole values in
result$alpha
.  The funtion to estimate density ratio is named
compute_density_ratio()
.
4. Multi Dimensional Data Samples
In the above, the input data samples x
and y
were one dimensional. densratio()
allows to input multidimensional data samples as matrix
.
For example,
library(densratio)
library(mvtnorm)
set.seed(71)
x < rmvnorm(300, mean = c(1, 1), sigma = diag(1/8, 2))
y < rmvnorm(300, mean = c(1, 1), sigma = diag(1/2, 2))
result < densratio(x, y)
result
##
## Call:
## densratio(x = x, y = y, method = "uLSIF")
##
## Kernel Information:
## Kernel type: Gaussian RBF
## Number of kernels: 100
## Bandwidth(sigma): 0.316
## Centers: num [1:100, 1:2] 1.178 0.863 1.453 0.961 0.831 ...
##
## Kernel Weights(alpha):
## num [1:100] 0.145 0.128 0.138 0.187 0.303 ...
##
## Regularization Parameter(lambda): 0.1
##
## The Function to Estimate Density Ratio:
## compute_density_ratio()
Also in this case, we can compare the true density ratio with the estimated density ratio.
true_density_ratio < function(x) {
dmvnorm(x, mean = c(1, 1), sigma = diag(1/8, 2)) /
dmvnorm(x, mean = c(1, 1), sigma = diag(1/2, 2))
}
estimated_density_ratio < result$compute_density_ratio
N < 20
range < seq(0, 2, length.out = N)
input < expand.grid(range, range)
z_true < matrix(true_density_ratio(input), nrow = N)
z_hat < matrix(estimated_density_ratio(input), nrow = N)
par(mfrow = c(1, 2))
contour(range, range, z_true, main = "True Density Ratio")
contour(range, range, z_hat, main = "Estimated Density Ratio")
The dimensions of x
and y
must be same.
5. References
[1] Hido, S., Tsuboi, Y., Kashima, H., Sugiyama, M., & Kanamori, T. Statistical outlier detection using direct density ratio estimation. Knowledge and Information Systems 2011.
[2] Sugiyama, M., Nakajima, S., Kashima, H., von Bünau, P. & Kawanabe, M. Direct importance estimation with model selection and its application to covariate shift adaptation. NIPS 2007.
[3] Sugiyama, M., Suzuki, T. & Kanamori, T. Density Ratio Estimation in Machine Learning. Cambridge University Press 2012.
Rbloggers.com offers daily email updates about R news and tutorials on topics such as: Data science, Big Data, R jobs, visualization (ggplot2, Boxplots, maps, animation), programming (RStudio, Sweave, LaTeX, SQL, Eclipse, git, hadoop, Web Scraping) statistics (regression, PCA, time series, trading) and more…
Source:: R News